Directional Drilling – Reamer Bits
.550 Bits / Block
.550 Diameter cap and insert carbide tools along with corresponding block are available.
Part Number
- R – 550MS
- BDC – 550CS1
- R – 550BLK
Flat Cutter Bits
Flat carbide cutter with ½” and ⅝” carbides can be used in a variety of cutting conditions.
| Part Number | Carbide |
|---|---|
| BD1 | (3) ⅝ " Square |
| BD2 | (1) ½ " Square |
| BD3 | (1) ⅝ " Square |
Undercutter Bits
A wide variety of carbide undercutter tools including parts not shown can be welded directly to your backreamer.
| Part Number | Length | Width | Height |
|---|---|---|---|
| 1. DD300 | 2.660 | .780 | 2.219 |
| 2. DD200 | 2.360 | .740 | 2.219 |
| 3. DD1500-47 | 1.435 | .720 | 1.500 |
| 4. DD1654 | 1.306 | .500 | 1.800 |
| Part No. | Length | Width | Height |
|---|---|---|---|
| 5. DD1250-50 | 1.000 | .500 | 1.250 |
| 6. DD1065-50 | .735 | .500 | 1.065 |
| 7. DD1750-46 | 1.500 | .875 | 1.750 |
| 8. DD1750-47 | 1.500 | .750 | 1.750 |
POXX Bits
Small cap carbide bits are cut at 45˚ angle while large cap tool is at 50˚. Allows you to weld directly to your backreamer.
| Part Number | Carbide OD |
|---|---|
| 1. POXX-01 | .638” |
| 2. POXX-24 | .638” |
| 2. POXX-23 | .945" |
| 2. POXX-56 | 1.142” |